The Redmi 13 (Moon) NV Data Corrupted is an affordable Xiaomi smartphone launched in 2024-2025 with a MediaTek /QUALCOM processor . When you’re facing problems like “NV Data Corrupt,” “Invalid IMEI,” “No Baseband,” or “No Network” — it means that the NV (Non-Volatile) data of your phone is corrupted.

In this guide, we’ll share the working Redmi 13 (Moon) NV Data Corrupted using the latest tools and techniques in 2025.
What Causes NV Data Corruption in Redmi 13 MTK (Moon)?
Flashing wrong or incompatible firmware
Unlocking or rooting with unofficial tools
IMEI erased after SP Flash Tool flashing
Improper use of META Mode or WriteIMEI
Using firmware without NVRAM or NVDATA partitions
Symptoms of NV Data Corruption:
IMEI shows as null / 000000000000000
SIM is not detecting / No service
Baseband unknown
WiFi MAC & Bluetooth issues
Redmi 13 (MTK) NV Data Fix – Full Guide (2025)
Let’s fix your Redmi 13 NV Data step by step using Maui META Tool / SN Write Tool, and MTK Meta Utility.
✅ Tools Required:
Maui META Tool (latest version)
MTK Meta Utility v92 or higher
SN Write Tool (for dual IMEI write)
Redmi 13 Stock Firmware (official)
USB Drivers for MediaTek
Database files (DB/MD1_DB & AP_DB) from the firmware
A Windows 10/11 PC
Method 1: Maui META Tool (Manual IMEI Write)
Install MTK VCOM USB Drivers
Ensure your Redmi 13 is off
USB cable connect (if removable battery or with boot key)
Launch Maui META Tool
Set it to “IMEI Download” mode
Load the AP DB & MD1 DB files from stock ROM (they’re within /firmware/md1_db)
After it’s connected via phone, it will show “META Mode Connected”
Enter IMEI
Enter original IMEI from your box/sticker
Press Download to Flash NV partition
Reboot Device
Disconnect and reboot
Dial *#06# to check IMEI is restored
Method 2: Using SN Write Tool (Dual IMEI/Barcode Restore)
Open SN Write Tool and select:
Target: SmartPhone
Option: IMEI, BT, WiFi
Load the DB Files
AP DB + MD1 DB from your Redmi 13 firmware
Enter both IMEI1 and IMEI2 from your device sticker
Click “Start” and connect your phone in META/Preloader mode
Wait for green PASS message
Method 3: Redmi 13 (Moon) NV Data Corrupted (Automatic NV Backup & IMEI Repair)
MTK META Utility is a powerful 2025 tool to:
Repair IMEI
Backup/Restore NVRAM, NVDATA
Disable DAA/SLA security on newer MTK phones
Open MTK META Utility
Select “Auto Detect + IMEI Repair”
Connect device in Preloader mode
The tool will auto-detect and allow you to write IMEI/NV
Reboot and test *#06#
Highly recommended for Redmi 13 (Moon) NV Data Corrupted Fix – 2025 Solution model
Precautions & Tips:
Backup NVRAM / NVDATA always before flashing
Use accurate DB files matching your firmware
Don’t flash without checking partition contents
Use only genuine tools (shun cracked/modified versions)
Need Help? Contact Redmi MTK IMEI Experts
Should you experience any problems in the process, you may contact seasoned unlocking and repair services like:
GSMHimelBD
Website: www.gsmhimelbd.com
WhatsApp: +8801775153740
Location: CDC Shopping Complex, Bangladesh
Remote Service Available Worldwide (using TeamViewer/USB Redirector)
Conclusion
Redmi 13 (Moon) NV Data Corrupted model can be easily repaired with the right tools like Maui META, SN Write Tool, or MTK META Utility. Don’t rush, just keep to the correct procedures, and always verify your IMEI and backup files.
Redmi 14c nv data fix click here




Leave a Reply